Fan coil Units are the solution for cooling/heating applications. They are available in a wide range of models and sizes with nominal capacities ranging from 6.0 kW to 20.2 kW in cooling and 13.1 kW up to 40.8 kW in heating.
This extensive Fan Coil series is ideal in combination with water chillers or heat pumps for airconditioning residences, offices, shops or any other commercial application were comfort conditions are required, blending in perfectly with the aisthetics of any space.
Features
- Asynchronous motors + 6-speed Autotransformer (3-speed connected in the factory)
- Last generation fan made of plastic with low revolutions number, statically and dynamically balanced, superlative silent
- Highly efficient coil
- Left or Right hydraulic connections
- High efficiency air filter, cleanable, on turning slides for an easy extraction and maintenance
- Wide variety of models, versions, accessories, variants, solutions
Main casing
Main casing (Bearing structure) made of extremely thick steel-sheet, resistant to rust, corrosion, chemical agents, solvents, aliphatics and alcohols.
Self-supporting and removable panels provided with holes (buttonholes) for ceiling/wall mounting directly through the main casing.
Pre-cuts slots and prearranged holes to configure the unit on request, to install the accessories, to output for the water connections on the left or right, to reverse the unit even on-site.
Assembled with self-threading screws for fast, total and easy check/maintenance. Reduced sizes, optimised volumes.
Available in a very large range of horizontal and vertical versions.
Available main casings:
Z : Single skin panel made of galvanized steel + internal thermal-acoustic insulation (class M1) of all parts in contact with the coil.
P : Single skin panel made of pre-painted steel white RAL9002 colour + internal thermo-acoustic insulation (class M1) of the parts in contact with the coil.
Heat Exchanger
Highly efficient coil (Turbolenced Fins with a high number of Reynolds) made of copper pipes and aluminium fins fixed by mechanical expansion. Coil connections provided with anti-torsion system, manual air vent valves, manual water drain valves. Standard connections on the right side; on request connections on the right side, anyway can be easily reversed even on working site.
1 coil for a 2-pipe system; 2 coils for a 4-pipe system.
Coils tested at 30 Bar pressure, suitable to work with water at max 15 Bar pressure.
Coils designed to work with hot water (boiler), low temperature hot water (condense boiler, solar energy system, hot water pump, etc.), high temperature water (industrial processes and/or high temperature boiler), chilled water (chillers and/or industrial processes), water added with glycol.
Fan Section
Fan section including 1, 2 or 3 centrifugal fans with double air inlet
Last Generation Plastic Blades (forward curved fins) directly coupled to the electric motor. Mounted on elastic and anti-vibration supports. Fan section statically and dynamically balanced.
Extensive diameter fans (= high air flow and high static pressure) with low revolutions (= low noise level).
Asynchronous electric motor provided with heat protection (Klixon), running capacitor permanently switched on, IP 42, Class B, electric cables protected by double insulation.
Manufactured according with international standards, 230Vac–1Ph–50Hz.
Fan section easy to remove (fixed by just 4 screws).
Standard unit (KT10/…/100) provided with single-speed motor + Autotransformer with 6 outputs in order to have 6 equal-distance speed (with performances changing from max=100% up to min = about 50%). Autotransformer is installed externally, on the unit side, to enable easy maintenance operations.
This technology warrantee a big flexibility, with possible connections according with the specific end-user needs, higher or lower speeds choices between the 6 available.
Factory standard pre-connected speed are no. 2-3-5 (with 1=max and 6=min). On request (no additional charge), any speed can be required.
Potentiate units (KT90P/…/120P) with motor with 5 or 6 speed obtained directly on the motor (compulsory technology to have potentiate motors, suitable for ductable units, with the correct price/performances rating). The speed obtained directly from the motor are closer to each other in comparison to technology with auto-transformer.
Accessories
Standard unit supplied without air filter.
Standard unit is made of a single bearing structure (single block) which includes the fan + the coil. It is also possible to make the unit in separate sections (fan section “SV” + coil section “SB”) assembled at the client convenience(first the fan-section and then the coil section, or vice-versa).
Very large range of accessories : valves, dampers, grills, etc.
Drain Pan
Double inclination drain pan for optimised condensate drainage, provided with drainpipe (standard on the same side of coil connections) + external heat insulation (class M1).
Real customer reviews